Who Repairs Sliding Patio Doors?
The sliding glass doors of your home are a great feature. They increase ventilation and natural lighting while also improving the appearance of your home.
It is crucial to maintain your sliding door with regular cleaning and lubrication. If your sliding door is experiencing serious issues, you must leave the project to professionals.
Glass Replacement
Sliding glass doors can be an elegant addition to your home. They let you enjoy your yard while allowing natural light into your home. However, over time they may begin to show signs of wear and tear. They could become difficult to slide or even break. It is essential to fix your sliding door as soon as possible if you spot any issues. Whether you need the rollers of your sliding patio door repaired or the glass replaced the handyman in your neighborhood can help.
Replacing the sliding patio door glass is relatively easy. To accomplish the task properly, you'll need the right tools and directions. Remove all plants and debris before you start. This will ensure that you don't break or scratch any glass.
You'll need to choose the right type of replacement glass for your patio door based on its style. There are a variety of different glass options, including double-pane windows that offer greater energy efficiency and increased privacy. You can also choose decorative glass options that will complement your existing design.
In certain situations, you may only need to replace the interior glass panes of your sliding patio door. If you have dual-pane glass units that are insulated, and there is moisture in between the two glass panes then the seals may be worn or damaged. In this scenario the two panes will have to be changed to ensure a proper seal.
Make sure that replacing a single glass panel on your sliding patio door is a different task than replacing the entire door. The door rollers and the frame are designed to work in tandem to make the sliding patio door functional, and they should be removed and then reinstalled with care in order to ensure that the new glass is properly installed. If you attempt to install the glass pane in a new location without first reinstalling the rollers and frame then it is likely that your patio door will be loose or unbalanced, and eventually break or crack.
Roller Replacement
If your sliding patio doors are sticking or aren't closing smoothly, it is possible to replace the rollers. After years of use, the rollers could get blocked by grime and dirt and stop smoothly moving. Lubrication is a good option but if it does not then you'll have to replace the rollers.
To take off the old rollers, start by removing the screws that hold them in place. Both sides of the door will have to be removed. When the rollers are loose you can pull them out of the door. Save the screws so you can put in the new rollers later.
You can purchase replacement sliding door rollers from hardware stores or lumberyards. They are cheap and easy to install. Select a steel roller with a ball bearing that's the appropriate size for your door, or a tandem wheel if you have an enormous door. If you have aluminum siding, think about using a nylon roller instead of steel for greater durability.
Before installing the new rollers clean the track. Apply a thin layer lubricant with an odorless spray can or lithium grease spray to the guide rails, tracks and rollers. A silicone lubricant will work better than a petroleum based grease because it doesn't attract dirt or grime.
Sliding patio door systems are a significant part of the home, and if there's an issue with the rollers, or they get stuck, it can be a security risk. You can extend the lifespan of your sliding patio door by taking care of worn or damaged rollers.
Weatherstripping Replacement
A sliding patio door may appear tight when you open it but the seals gradually weaken over time, letting in drafts, light and even inclement weather. It's time to change your weather stripping if must turn up the thermostat in order for you to avoid an unpleasant draft or condensation on glass panes. The good part is that you don't have to call an expert to install it - If you choose the right type of weatherstripping, it's an easy DIY project that you can finish in just a few minutes.
To begin start, look for gaps at the top and bottom of your patio doors where they join their frames. Bob Vila says that a tiny gap could let a lot air pass between your home and the outside, increasing energy bills by up to 10%. You should also examine the weatherstripping to determine if it has any damage that isn't repaired, such as cracks or missing pieces that allow cold air to enter and dust.
The most commonly used kind of weatherstripping used for sliding patio doors is called fin-seal. It's made of a strip of Mylar with bristles that can be bent back and forth in accordance with the motion of your door. It comes in a variety of lengths that can be adapted to fit different doors and windows. You can buy it on the internet or at many home improvement stores. You'll need a screwdriver, hooks, hammers, picks and a putty knife for installing it.
If your doors aren't old enough, you'll also need tools to unlock the lock cylinders. After loosening the screws, you'll need to lift the door out of the track (get help if necessary) and then set it on a pair of sawhorses, or other supports. Remove the headstop and any screws that are holding the door in the position.
After removing the door, use the putty knife to remove any old weatherstripping. Cut patio door replacement glass of weatherstripping using a utility knife leaving a bit to be used to make future repairs. If you're installing it on a new patio door, be sure to include the insulation seals on both sides of the frame prior to when you reinstall the door.
Frame Replacement
Sometimes, your sliding patio door frame can need to be replaced, since it could become warped or discolored over time. It can be a simple fix, or a brand new frame might be required to accommodate a larger glass surface or a different sliding patio door design. You'll want to choose a durable, attractive frame if you're replacing or fixing the existing one. Frames for sliding patio doors are available in white, which is a low-maintenance color. Tan is also available and can be stained or painted to match the exterior of your home.
Another issue that is common with sliding patio doors is that the screen door frame will become bent or dented as time passes. If this happens you'll have to locate a new screen door frame that matches the size of the door you have currently. There are several different types of screen door frames you can purchase that include extruded and roll-formed designs. Extruded frame for screen doors is more expensive, but it has greater strength and durability than a roll formed screen door.
The sliding screen door rollers can also wear out over time. This could cause the door to become stuck or become jammed. You can easily replace them with new rollers bought from a hardware store. It is also recommended to look over the rollers to determine whether you require replacing them.
Replacing the frame of your sliding patio doors can be a great way to enhance its appearance, improve efficiency in energy use, or meet any other particular requirements you may have. It is usually a more economical option than replacing the doors or glass alone. It is crucial to determine the length and width of the opening prior to when you replace the door. This will ensure you choose the right replacement. Also, you should ensure that your frame is square and level before installing it. It's a good idea to employ a spirit level to test this. Install the new frame and door following the manufacturer's instructions and the materials.